|
GSM Gateway for ISDN
| CGW-I:
ISDN to GSM Gateway
Cut your
business phone costs by connecting your ISDN telephone system
directly to the GSM cellular networks.
The CGW-I
is a BRI (ISDN2) to GSM Cellular Gateway that lets you call
gsm mobile phone numbers from your ISDN telephone system,
benefiting from low business tariffs, bypassing your landline
carrier and eliminating interconnection fees.
The CGW-I
is your transparent and low cost solution for calls to GSM
mobile phones:
- Fast
ROI (Return On Investment
-
Available with 2 GSM channels
- Supports
worldwide GSM frequencies
|
|
Incoming
and Outgoing Call Features
- Intelligent
Routing – Return up to 1,500 mobile calls directly
to the calling DDI (Direct Dial-In). CGW-I stores the link
between the dialing extension and the dialed cellular number.
When a missed mobile call is returned, CGW-I recognizes
the Caller ID and routes the caller to the dialer’s
extension.
- MSN
Routing – Route incoming cellular calls to default
Multi-Subscriber Number (MSN), such as a specific extension,
Automated Attendant or Voice Mail system.
- Call
Barring – Dedicate your SIM to handle only incoming
calls, outgoing calls, or both.
- Call
Diversion – Automatically reroute incoming calls to
an alternate channel when SIM is busy.
- Toll
Restrictions– Define which cellular operator prefixes
to allow the CGW-I to call and which ones not to allow.
- Redirect
Calls – Override Toll Restrictions and set up a cross-network
connection.
- Call
Duration – Limit the length of calls to protect you
from connections that are accidentally left open.
System
Management & Monitoring
- Full
Device Control – Configure system parameters and view
system status levels directly from your PC with included
user-friendly Windows-based utility program.
- Alarms–
Set thresholds to trigger selected SMS and Email alarms.
- Statistics
– View Reception Level and each SIM card’s accumulated
traffic.
- CDR–
Call Detail Recording log for up to 2,500 records.
- Balance
Call Distribution – Evenly distribute call traffic
sent to each SIM.
Configurable
Controls & Maintenance
- CLIP
/ CLIR – Display or hide SIM card numbers using Calling
Line Identification Presentation/Restriction setting.
- SIM
PIN Control – Protect each SIM within the CGW-I from
unauthorized use if removed.
- Network
Lock – Configure your CGW-I to work permanently with
only a specific operator.
- Roaming
– Allow calls to automatically connect to the strongest
available signal or restrict them to a specific network
operator.
- Dialing
Mode Support – Overlap or En Block.
- End
of Dialing Digit – Reduce the time required to connect
a dialed number.
- Gain
Control – Adjust volume levels for both incoming and
outgoing calls on each channel.
System
Specifications
- 2 Voice
Channels:Each with Integrated GSM Cellular Module
- Indicator
LEDs: LAN Status (Line and Active), Module Status (2)
- Built-in
LCD: Verify Signal Strength, Operational Status and Cellular
Operator Name to simplify maintenance.
- ISDN
Protocol Support: EuroISDN (Standard, In Bound DTMF Dialing,
France, Germany), 1TR6 (Germany)
- PBX
BRI Interfaces: NT/TE,PtP/PtMP
- Connectors:RS-232,
, LAN, ISDN Interface, SMA antenna (2), Sync In, Power supply
- FrequencyRanges:
900/1800 MHz or 850/1900 MHz
- SIM
Card: 3V (Plug in, Small)
- Receiver
Sensitivity: -104dBm
- Input:
110VAC, 60Hz / 220VAC, 50Hz
- Output:
9VDC, 1.5Amp
- Dimensions:
(HxWxD)– 21.5x4.3x18.5cm/8.47x1.69x7.28 inches
- Weight:
0.96 kg / 2.12 lbs
- Operating
Temperature: 00C-450C / 320F-1130F
- Relative
Humidity: 5-95%
|
|
|
